Starch Paste Kettle:-

FUNCTIONS:-

Basically this Unit is used for preparation of Starch Paste. Hemispherical shape ensures that the Heating of the Starch Paste is Uniform & gets more Surface area. The tilting type arrangement Ensures ease in unloading the Paste into any container or vessel. The Starch Is put in the kettle and  water is added till desired thickness is achieved. The Kettle is Jacketed & is Heated till the Starch Melts A Thick Paste is achieved. This Paste can be agitated either manually or with The Help of A Anchor Type agitator which will constantly stir. The Paste so that there will no lumps formation and proper mixing is achieved.
Temperature can be set to desired temp by adjusting The thermostat provided and The Temperature can be seen in the dial thermometer provided.

Structure :-

Starch Paste Kettle will be made out of S.S. 304 Rectangular Pipes and will be an independent resting type frame work where no foundation will be required. The Kettle will be a hemispherical type bowl with either steam / Oil / Water heating Jacket will be provided. The Kettle will be manufactured from 2.5 mm thk S.S. 304 Sheet and  The Jacket will be  of 2.5 mm Mild Steel (In case of steam Jacket the thickness will be 4  mm) There will be oil / water heated fitted at the  back bottom side of the Kettle.A temperature controller & a temp Indicator will be provided for temp control &  Indication. The Kettle will be Insulated With 30 Mm thk glass wool Insulation & Claded with 16 Swg S.S. 304 Sheet. Kettle will be buffed to 150 grit matt finish externally and Internally The Kettle will be buffed to 220 matt  finish.

Optionals Available:-

1. Built in stirrer arrangement with lifting & lowering device
2. Steam fittings with all connections factory fitted
3. Non Tilting type with bottom discharge models are also available.

Capacities Available

From 10 Ltrs to 2000 Ltrs Capacity.

TECHNICAL SPECIFICATION

• Hemispherical design for proper mixing of paste.
• Jacket for heating element as a part of kettle.
• External jacket for Insulation as an option.
• Heating element via steam (Provided by customer).
• Discharge from bottom
• Propeller  type impeller design for proper mixing of paste
• 75% closed & 25 % open top cover deign with proper locking
• All the contact part from SS.316
• All the non contact part from SS.304
• Operating panel will be fixed on pillar

OPTION ACCESSORIES

• Insulation jacket on Steam Jacket
• Flame Proof Construction
• Driven via motor & gear box assembly mounted on top

TECHNICAL SPECIFICATION