We are sole design, manufacture and supplier of Tee Type Strainers, Steel Tee Strainers, and Vertical Tee Strainers. These are manufactured from one piece. 'T' or fabricated Tee with bath tub type element is suitable for horizontal flowing medium or 90 flowing medium. Design of the element may be of Bath Tub Type, Conical Type or Partition Type depending on flow direction. 'T' strainers are recommended where there are limitations of space to accommodate Basket Type strainer. 'T' Type strainers with Butt Weld ends can be directly welded to piping.

Our Strainers are highly compact and applicable, where space is restricted. Unlike most other Strainers, Tee Type Strainers are ideal to use in either vertical or horizontal installations.

There are some different arrangement are available for the Cover as per the below.

1. Hinged Cover Type (For Quick Opening)
2. Bolted Cover Type (For high Pressure)

Application: Filtration of liquids, Lube & fuel oil, Chemicals etc.

Construction: Cast Iron, Cast Steel, Stainless Steel and Fabricated Construction.

Connections: Flanged, Screwed, S.W Ends. Flanges in DIN, ASA

Range:

1. Pressure: 150#, 300#, 600#
2. Sizes: NB 50 NB and upwards.

Element/Screen : Stainless Steel, Brass, Monel. From coarse say 8 mm to as fine as 0.5 micron. ‘

Features:

• Easily removable fitted without fasteners to seat.
• Easily removable cover with hinged bolt design or fixed type cover.
• High Filtration Ratio.
• Streamline design for low pressure drop.