ASHOKTOOLS CORPORATION - AHMEDABAD

Pillar Drill Machine

Manufacturer, exporter and supplier of Drilling Machines. We offer PSL-40A
Autofeed model, PSL-40, PRL-40, Round head model in same size and
PSL-40X, Xtra Heavy model.

 

General Features

 

  • Main spindle and pinion made from EN steel by forging.

  • Column, arm, work-head & gears made from finest closed drain caster iron; while spindle ram trim alloy steel.

  • Main spindle run out is checked for accuracy as per IS 2199.

  • For the smooth sliding of sliding arm, special ‘Slide-reliever-slots’  are given.

  • All moving parts are fine-finished with grinding to a close tolerance.

  • International  technical if ‘Taper wedge setting’. For complete slide-setting instead of normal one point setting.

  • Quality bearings with grease bath, so for permanent oiling.

  • Main gear and pulley are perfectly balanced.

  • Powder coated accessories for longer life and prevention of corrosion and pillage associated with usual chrome plating.

 

 

Specificaion  Model No. PSL-40X and PSL-40A* PRL-40 and PSL-40 PRL-25 PS-25 PR-19
Tilting workig table FIXED FIXED Upo 360* FIXED UPo360*
Sdrilling capacity 40 mm 40 mm 25 mm 25 mm 19 mm
Pillar Diameter 135 mm 121 mm 92 mm 92 mm 74.30 mm
Spindle nose to table distance 495 mm 595 mm 645 mm 660 mm 660 mm
disance from Spindle nose to base distance 1000 mm 1050 mm 1000 mm 1045 mm 900 mm
*Autofeed speed: (applies to PSL-40A only) 0.04 or 0.08
Distance from spindle center to pillar surface (in mm) 380(Max) 320 (Max.) 250(Max.) 250(Max.) 200(Max.)
Table travel 500 mm 480 mm 480 mm 480 mm 200 mm
taper in spindel  MT-4 MT-4 MT-3 MT-3 MT-2
number of speed 8 speed 8 speed 8 speed 8 speed 8 speed
Range of speed (RPM) 60 to2000 70 to 2000 70 to 2000 130 to2600 87 to 3224
Table size (in mm) 490x490 410x410 350 DIA. 330x330 260x260
Base size (m/c Area in mm) 820x490 440x715 255x310 365x575 480x300
Overall Base size (in mm)  825x495 445x720 425x670 370x580 490x310
Spindle travel 250 mm 250 mm 250 mm 180 mm 130 mm
Pillar Length 1475 mm 1450 mm 1400 mm 1410 mm 1170 mm
Overall hight with pulley guard 1840 mm 1860 mm 1780 mm 1730 mm 1420 mm
V-belt section B-74' B-59 B-51 B-52'' A-42''
Weight (Approx.) 500kg 325Kgs 250 kgs. 225 Kgs 100Kgs
Motor 1440RPM 3 Phase 440 Volts 2H.P. 1.5 H.P 1 H.P. 1 H.P. 0.5 H.P.
Shipping wooden case inner size LxWxH 1200x540x1860 mm 860x460x1580 mm 690x460x1550 mm 660x450x1770 mm 660x380x1440 mm

 

 

Model Code System
P = Pillar Drill m/c
19/25/40 = Drilling capacity
S = Square Head Model
R = Round Head Model
L = Long Spindle Travel
A = Autofeed Model
X = Xtra Heavy Model
Std. Accessory :

Motor Pulley       Tapper Drift       Manual Book         Drill-bit angle gauge

 

 

 

 
Fully equipped with precision machinery:

The company established before three decades, believes in to being self reliant in all aspects of production. Today it is one of the well equipped se-up to bring out the best Drill Machines, India can offer. The company has a strategic location in Bhavnagar with a large manufacturing floor, R&D and marketing departments. All our machineries and precision instruments are of high standards of manufacturing,
 
 
 
 
 
 
 
Ensuring quality of our drills and your product:

 Over the period, ‘P.Parmar’ has achieved unbeatable standards in designing the engineering parts, sure-n-smooth working of drilling processes and the finished results on your end-products. We never cut corners in raw material procurement or in achieving the utmost perfection. That shows on our products and finally in your products, too!
 
 
 
 
 
Expertise that never let you down:
Managed by highly experienced technocrat, the company has team of trained engineers assuring the quality at various stage of manufacturing. The technology and technics are upgraded every now and then with ongoig research and developmental activities. Your ‘P.Parmar’ Drill will always keep working with minimum maintenance. That’s promise.

 

Pillar Drill Machine

Related Products

Also Listed In

Power Press Lathe Machine Welding Machine Drill Machines Boring Machines Air Compressors Grinder Machine Bandsaw Machine Horizontal Boring Machines
Our Products & Services
Air Compressors Lathe Machine Pillar Drill Machine Radial Drill Machine Jumbo Grinder Machine Heavy Duty Precision Planers Bandsaw Machine Welding Machine Supreme Grinder Machine C Type Power Press
Share this page on Facebook Twitter Google Digg Reddit LinkedIn Pinterest StumbleUpon Email